Short for Asynchronous Transfer Mode, a network technology based on transferring data in cells or packets of a fixed size. The cell used with ATM is relatively small compared to units used with older technologies.
The small, constant cell size allows ATM equipment to transmit video, audio, and computer data over the same network, and assure that no single type of data hogs the lineIn ISDN, there are two types of channels, B (for "Bearer") and D (for "Delta"). B channels are used for data (which may include voice), and D channels are intended for signalling and control (but can also be used for data).

There are two kinds of access to ISDN. Basic rate interface (BRI) — also Basic rate access (BRA) — consists of two B channels, each with bandwidth of 64 kbit/s, and one D channel with a bandwidth of 16 kbit/s. Together these three channels can be designated as 2B+D.
Primary rate interface (PRI) — also Primary rate access (PRA) — contains a greater number of B channels and a D channel with a bandwidth of 64 kbit/s. The number of B channels for PRI varies according to the nation: in North America and Japan it is 23B+1D, with an aggregate bit rate of 1.544 Mbit/s (T1); in Europe and Australia it is 30B+1D, with an aggregate bit rate of 2.048 Mbit/s (E1).

Short for asymmetric digital subscriber line, a new technology that allows more data to be sent over existing copper telephone lines (POTS). ADSL supports data rates of from 1.5 to 9 Mbps when receiving data (known as the downstream rate) and from 16 to 640 Kbps when sending data (known as the upstream rate).